Strategy Analyzer won't run optimization

[MikeGutmann]

I was cruising along well, running optimizations, when I encountered the error from the Strategy Analyzer, Optimizer: "There are no optimization results available, since the strategy has no parameters to optimize." But the params hadn't been changed.

A Google search found recommendations that this error is corrected with a restart and/or reboot of the PC (NT having run out of memory, or otherwise). This did at first work, but now, after repeated resets/reboots, I get the same error message as above.

Any ideas? Has an NT database been corrupted?

Many thanks,
Mike G
PS I may have posted this in another sub-forum by mistake. Sorry for any duplication.

[NinjaTrader_AdamP]

Mike,

Please try repairing your database: Tools --> Options --> Misc --> Repair DB.

If that doesn't work, can you confirm that you can get some to work and not others? Have you tried the "SampleMACrossOver" strategy?

[MikeGutmann]

Adam,
Thanks for your reply.
I ran the DB repair and continue to get the optimizer error.
I ran the SampleMACrossOver with the optimizer, changeing one length param to allow optimizations, and continue to get the error.
Next step suggestion?
Thanks again! --Mikeg

[NinjaTrader_AdamP]

Mike,

How are you setting up the parameters in the optimization?

It should be Beginning ; End ; Stepsize

[MikeGutmann]

Yes, as you describe. Please note that I've run many (100s) of optimizations successfully, and then just ran into this. Perhaps a re-install? I assume workspaces can be saved across installations.
Thanks again, Mike

[NinjaTrader_AdamP]

Mike,

You could try this, however if the issue is in the My Documents / NinjaTrader 7 directory it wouldn't go away. All settings and custom compiled scripts are located there.

Do you know how to compile? If so, you could check for programming errors. Additionally, we can check your most recent trace. It is located in My Documents / NinjaTrader 7 / trace.

If you desire privacy with this you can email me at support at ninjatrader dot com, along with ATTN : Adam in the message body along with a link to this forum thread.

[MikeGutmann]

Adam,
Just successfully ran an optimization. So I'm not sure what the issue is here -- operator error or something corrupted with my NT installation. Let me keep checking at my end.
--Mike

[NinjaTrader_AdamP]

Mike,

Thanks for your note.

Yes, keep me updated. It looks like a restart of NT sometimes fixes this.