TRO Indicators

[NinjaTrader_Josh]

This thread is for anyone familiar with TheRumpledOne's prior work over at tradestation. Attached in this post will be all the indicators I have converted so far.

Edit: Latest version (20070816) includes 13 indicators.
TRO_Buy_Zone v1.01
TRO_Dynamic_FibsSR v1.02
TRO_Dynamic_FibsSR2L
TRO_Dynamic_FibsSR2U
TRO_Dynamic_SR3 v1.10
TRO_SM_BattleLines
TRO_SM_CandleColor2
TRO_SM_Compass v1.1.1
TRO_SM_Control_PMSM6
TRO_SM_Trend v1.2.1
TRO_SMAA_GridironTrade
TRO_SMAA_HLBreak
TRO_PMSM_HL v1.01
TRO_PMSM_Trend v1.11

[NinjaTrader_Josh]

TRO_SM_Trend v1.2.1
http://kreslik.com/forums/userpix/2138_TRO_SM_Trend_1.jpg

Changelog:
v1.2.1 - Fixed missing Interval display for Volume and Tick time periods
v1.2.0 - Allowed indicator to update to the visible chart data rather than just the latest data
v1.1.0 - Added ability to choose moving average type
v1.0.0 - Public release

[NinjaTrader_Josh]

TRO_SM_Compass v1.1.1
http://kreslik.com/forums/userpix/2138_TRO_SM_Compass_1.jpg

Changelog:
v1.1.1 - Fixed a potential bug resulting in the indicator not plotting
v1.1.0 - Allowed indicator to update to the visible chart data rather than just the latest data
v1.0.0 - Public release

[NinjaTrader_Josh]

TRO_SMAA_GridironTrade
http://kreslik.com/forums/userpix/2138_TRO_SMAA_GridironTrade_1.jpg

[NinjaTrader_Josh]

TRO_SM_BattleLines
http://kreslik.com/forums/userpix/2138_TRO_SM_BattleLines_1.jpg

[NinjaTrader_Josh]

TRO_Dynamic_SR3 v1.10
http://i9.tinypic.com/63jo0b8.png

General Usage Guidelines:
Enter Long when price drops to make new support then retraces back pass cyan line.
Enter Short when price climbs to make new resistance then retraces back down pass magenta line.

Changelog:
v1.10 - Added plots for Long/Short entry triggers
v1.10 - Fixed another bug causing S/R lines to plot improperly
v1.01 - Fixed a bug where S/R lines were not updating properly

[NinjaTrader_Josh]

TRO_Dynamic_FibsSR v1.02
http://i12.tinypic.com/6gn8ba9
Changelog:
v1.02 - Fixed another bug causing S/R lines to plot improperly
v1.01 - Fixed a bug where S/R lines were not updating properly

[NinjaTrader_Josh]

TRO_Buy_Zone v1.01
http://kreslik.com/forums/userpix/2138_TRO_Buy_Zone_1.jpg

Changelog:
v1.01 - Improved the painting method of the Buy Zones

[NinjaTrader_Josh]

TRO_PMSM_HL v1.01
http://i18.tinypic.com/675s38k.png

Changelog:
v1.01 - Revamped plotting method to use Gumphrie's dots
v1.00 - Public release

[NinjaTrader_Josh]

TRO_PMSM_Trend v1.11
http://www.ninjatrader-support.com/vb/%5BIMG%5Dhttp://i9.tinypic.com/5x75tn7.png%5B/IMG%5Dhttp://www.ninjatrader-support.com/vb/%5BIMG%5Dhttp://i9.tinypic.com/5x75tn7.png%5B/IMG%5Dhttp://www.ninjatrader-support.com/vb/%5BIMG%5Dhttp://i15.tinypic.com/5zq9qub.jpg%5B/IMG%5Dhttp://i9.tinypic.com/5x75tn7.png

Requires TRO_SM_Trend (Included in the zip)

Changelog:
v1.11 - Revamped plotting method to use Gumphrie's dots
v1.10 - Added ability to choose moving average type

[NinjaTrader_Josh]

TRO_SMAA_HLBreak
http://kreslik.com/forums/userpix/2138_TRO_SMAA_HLBreak_1.jpg

Break Up = Current Day High - Previous Day High
Break Dn = Previous Day Low - Current Day Low
Range = Current Day High - Current Day Low
Range[1] = Previous Day High - Previous Day Low

Range and Range[1] will have green text if they are within Avg Range+-Std Dev. (68.1%)
Orange text if Avg Range+2 Std Dev > Range > Avg Range+Std Dev or Avg Range-Std Dev > Range > Avg Range-2 Std Dev. (95.45%)
Red text if Avg Range+3 Std Dev > Range > Avg Range+2 Std Dev or Avg Range-2 Std Dev > Range > Avg Range-3 Std Dev. (99.73%)
Red background if Range > Avg Range+3 Std Dev or Avg Range-3 Std Dev > Range.
http://kreslik.com/forums/userpix/2138_TRO_SMAA_HLBreak_Coloring_1.jpg

[zoltran]

uacvax,
I'm not a follower of these indicators, but still wanted to say 'thanks' for your generosity in posting them

[whitmark]

Nicely done, uacvax! Good to see TRO's work lives on in another platform. Good demonstration of the power and the "customizing" capabilities of the C#.NET based NinjaScript.

Whitmark

[Gumphrie]

Thanks uacvax! I don't know the TRO system, but what a great resource to start learning.

[NinjaTrader_Josh]

I have made several changes and fixes to the indicators I have posted above. Please update your versions as you see fit. You can also grab a convenient TRO indicator pack from the first post of this thread.

Indicators Modified:
TRO_PMSM_HL
TRO_PMSM_Trend
TRO_Buy_Zone
TRO_Dynamic_FibsSR
TRO_Dynamic_SR3

[Greg1]

I'm trying to learn more about these indicators. One resource I've found is http://kreslik.com. Not sure if anyone has other good sources of info ?

[NinjaTrader_Josh]

Blah. DynamicFibsSR and DynamicSR continue to not plot exactly the way I want. I'm working on it.

Greg1 thats about the only interactive resource left that I'm aware of.

[BC5391]

UACVAX nice job on the converion, may I ask of another addition to the code for the TRO psms indicator.
Basicly it is another color. if there is not a reasonable amout of seperation between the MA's then the the additional color would show a caution signal.

a similar code ois below and a picture to show what I am trying to say.

Thanks in advance


#property indicator_chart_window
#property indicator_buffers 2
#property indicator_color1 Green
#property indicator_levelcolor Red
#property indicator_levelstyle STYLE_SOLID
#property indicator_level1 8
#property indicator_level2 -8
#property indicator_minimum -20
#property indicator_maximum 20
extern bool Alerts_On = true;
//---- buffers
double IND[];
bool EntryFlag,TradeFlag;
datetime CurrBar;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int init()
{
//---- indicators
IndicatorShortName("Separation");
SetIndexStyle(0,DRAW_LINE);
SetIndexBuffer(0,IND);
//----
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator deinitialization function |
//+------------------------------------------------------------------+
int deinit()
{
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
int start()
{
int limit;

[grd974]

Hi UACVAX,
I'm not a TRO indicators user but, at least, I want to thank you for the generous help you provide newbies as myself with, in learning NinjaScript language.

[NinjaTrader_Josh]

BC5391: I will try and work something like that in for you soon. I am working on a bunch of other personal indicators at the moment so please bare with me.

Edit: I have uploaded the new and improved DynamicSR & DynamicFibsSR indicators. Grab them on the first page.

[pdawg]

uacvax,

You continue to impress me. Thanks for your continued contributions. Couple of questions: Is there documentation on how to use these indicators? Secondly, are you familiar with the TTM indicators from John Carter? I've seen versions of his squeeze indicator for esignal and tradestation. I was curious if you are able to convert?

[NinjaTrader_Josh]

pdawg: I don't provide documentation on these indicators since I am still trying to learn to use them effectively myself. To get you started you should read the now defunct Trend Indicator thread that was on TradeStation. Go to kreslik.com and search for "TradeStation Blocked the Trend Thread". Its a long read though. 100 pages. If you have any specific questions I can try and answer them, but I am by no means an expert to TRO's indicators.

As far as TTM, I have not dealt with it before, but would be glad to take a look. If you could email me the source code I'll see what I can do. Be warned though, I might not get around to it in a timely manner because I am currently in development of a strategy for myself.

[pdawg]

No problem, I have attached the Squeeze indicator .efs, thanks and will check out that site

-Philip

[BC5391]

The squeeze is actually a nice strategy, that I have not used for some time (been trying other methods) forgive the picture, I do not have the etting on the bands as Herbert Senters describes, but you shoud get the idea.

The strategy behind the Squeeze is when the Keltner chanel goes inside the Bollinger bands then breaks out. The photo shows the results. This can be used on any timeframe of course the higher the timeframe the larger your stop must be

If you like I will go back over Senters course and post the correct settings for the bands

[BC5391]

By the way what format are you posting your pictures in to have them come out so nice?

[Eric M.]

Hello uacvax,

Many thanks for all your efforts on the conversion of the TRO indicators.
One indicator I have found useful is TRO's $highfive efs and was wondering if you could convert this so I could use it in NinjaTrader.
Any help would be greatly appreciated.

Regards,
Eric

[NinjaTrader_Josh]

BC5391: I am just uploading my images to tinypic.com first. Then I use the "Insert Image" button in the top of the wysiwyg editor.

Eric M: I am unfamiliar with the highfive indicator. Perhaps you could provide some pictures of it in action and describe it a little bit for me? It makes understanding code a lot quicker when I know what the end result looks like beforehand.

[Eric M.]

Hello uacvax,

I've attached a chart with TRO's version of $highfive. The original version monitored MER rather than the current futures contract.
Here is a link for an explanation of it's use.
http://www.mohansmarketforce.com/page/tcf/high5/high5-table.html?sid=1064159531.10268

Eric

[NinjaTrader_Josh]

Whats the difference between $highfive and $highfive2? I'm guessing you want $highfive2?

[Eric M.]

Highfive2 is just a cut down version of the original version.
I would prefer the highfive version and would it be possible to edit the indexes in the indicator panel so that other indices can be monitored ?
Many thanks.

[NinjaTrader_Josh]

I don't believe we can load multiple instruments into one chart at the moment. You're going to end up needing to load several charts and stack them like how I stacked the TRO_SM_Trend indicator. At least this way you have the choice of whatever instrument to track though. I'll see what I can do.

Edit: Actually I was just looking at the source code for $highfive. All the text are done pretty statically. This is turning to be quite troublesome.

[NinjaTrader_Dierk]

>> I don't believe we can load multiple instruments into one chart at the moment
That is correct: you can't.

[NinjaTrader_Josh]

TRO_Dynamic_FibsSR2L and TRO_Dynamic_FibsSR2U

http://kreslik.com/forums/userpix/2138_TRO_Dynamic_FibsSRLU_v100_1.png

"There are new TRO DYNAMIC FIBS SR indicators:
TRO DYNAMIC FIBS SR2U and TRO DYNAMIC FIBS SR2L.
SR2U displays the "-" and dots in the price pane.
SR2L displays the PMSM dots. Cyan go long, Magenta go short, Yellow stop out of trade.

There are 2 new inputs:
iMaxStop - is the maximum amount you want to risk. If the difference between the trigger and the stop is greater than the max stop, the trade trigger will not show because it's more than your risk amount.
iSROffset - is a "fudge" factor. If the price is within iSROffset range of dynamic support/resistance it's as good as a touch. This allows the trade entry trigger to trip earlier in some cases." -TRO

[NinjaTrader_Josh]

TRO_SM_CandleColor2

http://i13.tinypic.com/6gybs6w

This indicator lets you view the latest candles of multiple time frames very easily. You no longer need to clutter your screen with 5 charts just to see what the latest candle looks like on a certain time frame.

You can also set how many historical dots you want plotted.

P.S. I will be redoing my previous TRO_SM_* indicators to use my latest plotting method. Before when you scrolled backwards the indicator wouldn't update to reflect the past. In the CandleColor2 indicator you can scroll wherever you want and the indicator will display the correct values for what you are seeing on the chart at that moment.

Edit: The updates are complete. Grab them on page1.

[goldfly]

uacvax, this is some great stuff. The Dynamic Fibs is at least educational.

I tried checking the referenced site, but there is so much going on with TRO that it's tough to tell if there is a strategy guide.

Can you point me to something there?

[NinjaTrader_Josh]

Do a search for the Trend Thread on that site. That's as close to a guide as it gets.

[goldfly]

The "Trend Thread". You mean "TradeStation blocked the TREND thread"?

Ok got that. Downloaded the files you put up there. That's still a pretty big chaw......

Oho! So now it's Josh, the Certified NinjaScript Expert. Congatulations.

Does this mean we'll be the recipients of even more cool and useful indicators by your hand? If so, let me make some requests.......

How about the :

Volume Spread LRG (That's based on the NYSE) (Page 91)

Although it's meant for the TS Radar is there a way to adapt the
SLOT MACHINE MOMENTUM INDICATOR (Also on page 91)?

SM_TREND_MIDDLE (Page 90)

SMAA_VolumeAvg (Page 89)

There be more, I'm sure. I'm working my way backwards in the thread.

Thanks.

[NinjaTrader_Josh]

Thank you for your kind words goldfly. At the moment I have a lot of other personal projects I am working on, but I will definitely find some free time in the future to convert those indicators also. Hopefully sooner then later. Glad you find the work useful, but the thanks should really be placed on TRO who the indicators originated from.

[NinjaTrader_Josh]

TRO_SM_Control_PMSM6
http://i11.tinypic.com/644wbav.png

"How I use TRO_SM_CONTROL_PMSM6:
The Major/Minor daily is the row that dictates which way to trade.
If buyer/buyers then I look to buy.
If seller/sellers then I look to short.
If Major and Minor disagree... I WAIT. NO TRADING.
Then, I look at the 60 minute row. Same rules as daily.
If I am a buyer and the 1/5/15 rows all say seller, I know the buyers will be pushing the sellers back soon.
When I see the price stop moving at DYNAMIC SUPPORT, then I buy.
When I see the price stop at dynamic resistance and the sellers take control on the 1 or 5, I sell.
This is so simple it's not funny.
All you have to do is follow the rules.

Focus on:
1) who's in control ?
2) is price at/near dynamic s/r " -TRO

[OUFan]

You might try searching for The Rumpled One on TradeStation. That is what Avery called himself on TradeStation.

[Greg1]

This may be a dumb question. I got this indicator, compiled it and put it on a chart. But, I just get one row for the timeframe of the chart in question. How the heck did you get the chart where it shows multiple time frames in one window?

[NinjaTrader_Josh]

They are multiple charts stacked on top of each other. Each chart is set to a different time interval.

[Gumphrie]

I applied some multi timeframe code I've created to TRO's Control PMSM and made it go to a seperate window to create the desired effect.

Note for this to work you must only apply it to a 1 minute chart with enough data to cover the daily and weekly periods. I haven't done monthly as I believe that is not required and besides its probably too much overhead.

Also, don't try adding it more than once per instrument as it will automatically close any other windows with the same name. It also helps to either minimise it when you are not using it or to minimise the chart when you don't want that. This helps to avoid it having to repaint itself all the time when you are scrolling through a chart.

http://www.acuclick.net/TRO_Control.jpg

ChangeLog :

v1.01 - Changed 4th September so updates without the chart being visible.
The change means you can't scroll backwards through a chart looking at historical results, so have made the option to return to the old mode into a parameter.
Have also optimised the lookups to make it fast enough to cope with this new mode without locking up the cpu. Gives overall better performance.

To import:

- Download the file contained in this thread to your desktop
- From the Control Center window select the menu File > Utilities > Import NinjaScript
- Select the downloaded file

[randyjb]

Gump...

You appear to have done a smashing job on making this multi-timeframe and finally putting it into an elegant output we can all use. I will run it next week and see how it does.

Thanks again for a truly fine job on this.

Happy Trading,
EZ

[NinjaTrader_Josh]

Gumphrie that is amazing stuff.

[Gumphrie]

Thanks EZ and Josh. Hopefully we can all get some results out of it.

[Gumphrie]

I have updated the Popup attachment to v1.01 to resolve some issues.
Please download from the original post.

[jstockman]

Guys

First thank-you Josh for you work.

Are the candle colors suppose to be the same color as the history dots. Please take a look at the daily. and minute.

Regards,

jstockman:)

[NinjaTrader_Josh]

Nope. TRO Control's historical dots do not correspond with candle color. The CandleColor2 history does though. In TRO Control, the dots correspond with the Major & Minor columns. If both are red the dot will be red. If both are green the dot is green. If they differ then the dot is yellow.

[pdawg]

Josh,

Nice work as usual. Maybe I'm blind but where is the Dynamic S/R indicator that this is to be used with?

Thanks,

Philip

[NinjaTrader_Josh]

lol blind like a bat.

http://www.ninjatrader-support.com/vb/showpost.php?p=12778&postcount=6
http://www.ninjatrader-support.com/vb/showpost.php?p=12779&postcount=7

[mrlucky1x]

You can sort of duplicate this with Market Analyzer but you need a different window for each of the five. Then you can set alerts on the various thresholds.


Hello uacvax,

I've attached a chart with TRO's version of $highfive. The original version monitored MER rather than the current futures contract.
Here is a link for an explanation of it's use.
http://www.mohansmarketforce.com/page/tcf/high5/high5-table.html?sid=1064159531.10268

Eric

[RK_trader]

Thanks TheRumpledOne for the original indicator and Josh for converting it to Ninja.

Do you know if there is any "TRO Plot" indicator for Ninja, using which one can plot the HOD,LOD (and update them dynamically as new HOD and LOD form) and the midpoint between the HOD and LOD.

Thanks
RK

[NinjaTrader_Josh]

I haven't converted any, but you could do one yourself through the use of the CurrentDayOHL().

Do something like
currentHigh.Set(CurrentDayOHL().CurrentHigh[0]);
currentLow.Set(CurrentDayOHL().CurrentLow[0]);
currentMid.Set(currentLow[0] + (currentHigh[0] - currentLow[0]) / 2);

[RK_trader]

Thanks Josh. I appreciate it.

I am still Ninja programming. If its not much work, can you or anyone please attach this as a .zip file, so that I can load it and modify/change the code.

Thanks for your time.

Thanks
RK

[DORAIRAJ_S@HOTMAIL.COM]

Please advise on the location where I can view the application details of the TRO Control PMSM indicator.
If such a descriptive document is not yet available, can you prepare the same, for our better understanding and application of the subject indicator for effective usage.

[DORAIRAJ_S@HOTMAIL.COM]

I believe that Dynamic Fib indicator superseeds dynamic S/R indicator, as it comprises of the later's logic as well.
Also, can I have a detailed appliocation guidelines for using these two indicators,as the desciption given under your attachments (9/12/2007 at 12:46PM)are very sketchy.

[NinjaTrader_Josh]

These indicators are presented as is. There are no documentation for them. As explained in this thread if you want to learn more about this you will need to google up TheRumpledOne (aka TRO).

The descriptions given are general guidelines. You must figure out how you want to trade it on your own.

[DORAIRAJ_S@HOTMAIL.COM]

Attn: GUMPSHIRE
Can I have your valuable advise and suggestions on the application of these indicators please.
Raj

[DORAIRAJ_S@HOTMAIL.COM]

Attn: GUMPHRIE:
Can I have your valuable advise and suggestions on the application of these indicators please.
Sorry for mis-spelling your name in my earlier mail addressed to you.

Raj

[randyjb]

Gumphrie did a great job on some of the TRO indicators, but he does not provide support on how to trade with them. If you wish further information on those indicators you can go over to the forums at www.kreslik.com (http://www.kreslik.com) and dig out the information for yourself.

Happy Trading

[Gumphrie]

Thats right, all I did was port one of them to a popup format for everyone's ease of use and as a coding exercise. The Rumpled One is the originator and Josh is the original porter, I have no more info on them then anyone else.

[spyro]

hello


maby josh or other expert can put inside the "battle lines" 1 hour interval?


thanks very much

[NinjaTrader_Josh]

Hi spyro,

Due to time constraints I cannot add the requested feature, but anyone can feel free to try and modify it.

[slableak]

No problem, I have attached the Squeeze indicator .efs, thanks and will check out that site

-Philip Hi pdawg, I tried to import this indicator and it said there were no files in the attachment. Can you let me know if it is a good file?

thanks,
David

[NinjaTrader_Josh]

The file is a good file, but that file contains a file for eSignal not NinjaTrader.

[sam30]

if you go to the future (scroll on the x-axis) in the chart then it bugs (at least with NT6.5.0.9)
you probably should do a little check
thanks a lot for this awesome indicator


I applied some multi timeframe code I've created to TRO's Control PMSM and made it go to a seperate window to create the desired effect.

Note for this to work you must only apply it to a 1 minute chart with enough data to cover the daily and weekly periods. I haven't done monthly as I believe that is not required and besides its probably too much overhead.

Also, don't try adding it more than once per instrument as it will automatically close any other windows with the same name. It also helps to either minimise it when you are not using it or to minimise the chart when you don't want that. This helps to avoid it having to repaint itself all the time when you are scrolling through a chart.

http://www.acuclick.net/TRO_Control.jpg

ChangeLog :

v1.01 - Changed 4th September so updates without the chart being visible.
The change means you can't scroll backwards through a chart looking at historical results, so have made the option to return to the old mode into a parameter.
Have also optimised the lookups to make it fast enough to cope with this new mode without locking up the cpu. Gives overall better performance.

To import:

- Download the file contained in this thread to your desktop
- From the Control Center window select the menu File > Utilities > Import NinjaScript
- Select the downloaded file

[ssierra]

Hi All,

this indicator seems very nice. Thanks to all the people that spent some time on it!

I have one doubt, if I used it with a live update (not at bar close) the trends used to change very quickly in different timeframes. Does this make sense?

I tried to use the update on bar close but then the indicators hangs with the following message.

Cheers,

[NinjaTrader_Dierk]

Please make sure you are on latest 6.5.0.10.

[ssierra]

Please make sure you are on latest 6.5.0.10.

Hi,

Yes I am and I reseted the instruments a couple of time.

Thanks

[NinjaTrader_Josh]

Which indicator are you referring to? Several of these TRO indicators have not been made compatible with NT6.5 yet.

[ssierra]

Which indicator are you referring to? Several of these TRO indicators have not been made compatible with NT6.5 yet.

Hi Josh,

I am refering to the last one posted by Gumphrie (TR)'s Control PMSM6 Pop).

Cheers

[NinjaTrader_Josh]

I see. I am unaware of the status for that particular indicator.

[NinjaTrader_Dierk]

Hi,

Yes I am and I reseted the instruments a couple of time.

Thanks
Please proceed as Ray suggest on the other thread and send traces and logs by Help->Mail to support, subject "for Dierk". Thanks

[fragalles]

Can you make this indicator compatible with NT 6.5, the pivots are slightly different...

Thanks you in advance
Peter

TRO_SM_BattleLines

[NinjaTrader_Josh]

I will when I have some free time. No ETA on this though.

[random_person]

I'd like to jump on this thread's generous bandwagon and add an additional indicator request. The indicator is the 'm sheiner'.
Link:
http://kreslik.com/forums/viewtopic.php?t=97&highlight=msheiner

Attached is the eld code.

I personally find this one useful and others might as well.

Thank you.

[fragalles]

Well I think the targetst that most traders use are the pivots and halfpivots, most of the time they also agree with fib extensions so using them as targets is generally not a bad idea.

The reason why i like the battlelines indicator is because they display not just pivots but midpivots, so like the trade the markets indicator:
http://www.tradethemarkets.com/products/item8.cfm
its shows you clearly where those pivot lines are...


I'd like to jump on this thread's generous bandwagon and add an additional indicator request. The indicator is the 'm sheiner'.
Link:
http://kreslik.com/forums/viewtopic.php?t=97&highlight=msheiner

Attached is the eld code.

I personally find this one useful and others might as well.

Thank you.

[zeller4]

TRO_Buy_Zone v1.01
http://kreslik.com/forums/userpix/2138_TRO_Buy_Zone_1.jpg

Changelog:
v1.01 - Improved the painting method of the Buy Zones


Josh,
I have a copy of the Hourly Buyzone but would like to see if you or someone could make the hourly zone "editable" to a half-hourly zone. I have a copy of a "CurrentHourOHL" file but am unable to modify it yet.
I'm attaching what I've tried so far but the plot so far is identical to the hourly file.
Thanks for any help or direction you can give.
Kirk

[NinjaTrader_Ray]

Unfortuntately we do not have available resources to do this at this time. You could try one of our NinjaScript consultants.

List - http://www.ninjatrader.com/webnew/partners_onlinetrading_NinjaScript.htm

[willyad]

Josh,
I have downloaded TRO Indicators and they are working fine. Great work.

TRO-Control-pmsm6-pop, when I run my pmsm, my pmsm screen flickers. Is it some fault at my settings, my computer or some thing else. I am using XP. Any idea, please help. Thanks

[NinjaTrader_Ben]

Hello,


I recommend contacting the author of the indicator. If you believe it is NT please remove the custom indicators and retest then let us know the results.

[altrader]

I'm pretty sure this isn't possible but maybe someone can confirm. I was looking at TRO PMSM trend indicator and wondered if it was possible to modify this so I can reference values from other timeframes?

I seem to remember that this isn't possible unless within a strategy .. so in other words I can't do it?

Just thinking that there are probably a number of applications for this e.g. close above/below midpoint, Heikin Ashi colours/rotations etc that might be interesting to see in one indicator showing multiple timeframes.

Can anyone advise or confirm if it is or isn't possible?
thanks

[T2020]

I'm wondering if there are any preferred settings on the TRO Buy zone for the
S & P mini > Offset > regular or pre market charting times . From the author
or anyone else ? tia .

[altrader]

I'm wondering if there are any preferred settings on the TRO Buy zone for the
S & P mini > Offset > regular or pre market charting times . From the author
or anyone else ? tia .

I think someone called Khalid posted some settings on Kreslik. It was about a point wide .. your best bet is to try the threads on www.kreslik.com. Worth posting here if you find them.

[T2020]

I think someone called Khalid posted some settings on Kreslik. It was about a point wide .. your best bet is to try the threads on www.kreslik.com (http://www.kreslik.com). Worth posting here if you find them.
Thanks for the link altrader . Found some posts under Tradestation indicators,
but nothing concrete just yet . Thanks again .

[tradinghumble]

Hi Josh, quick question for you. How do I plot the panel you have on top of this image? I can get the indicator but not the panel with the columns. Thanks in advance.

TRO_SMAA_HLBreak
http://kreslik.com/forums/userpix/2138_TRO_SMAA_HLBreak_1.jpg

Break Up = Current Day High - Previous Day High
Break Dn = Previous Day Low - Current Day Low
Range = Current Day High - Current Day Low
Range[1] = Previous Day High - Previous Day Low

Range and Range[1] will have green text if they are within Avg Range+-Std Dev. (68.1%)
Orange text if Avg Range+2 Std Dev > Range > Avg Range+Std Dev or Avg Range-Std Dev > Range > Avg Range-2 Std Dev. (95.45%)
Red text if Avg Range+3 Std Dev > Range > Avg Range+2 Std Dev or Avg Range-2 Std Dev > Range > Avg Range-3 Std Dev. (99.73%)
Red background if Range > Avg Range+3 Std Dev or Avg Range-3 Std Dev > Range.
http://kreslik.com/forums/userpix/2138_TRO_SMAA_HLBreak_Coloring_1.jpg

[tradinghumble]

Josh, never mind, I found out you need to have the daily chart in order to see the summary table. THnaks.

Hi Josh, quick question for you. How do I plot the panel you have on top of this image? I can get the indicator but not the panel with the columns. Thanks in advance.

[roadshow]

I applied some multi timeframe code I've created to TRO's Control PMSM and made it go to a seperate window to create the desired effect.

Note for this to work you must only apply it to a 1 minute chart with enough data to cover the daily and weekly periods. I haven't done monthly as I believe that is not required and besides its probably too much overhead.

Also, don't try adding it more than once per instrument as it will automatically close any other windows with the same name. It also helps to either minimise it when you are not using it or to minimise the chart when you don't want that. This helps to avoid it having to repaint itself all the time when you are scrolling through a chart.

http://www.acuclick.net/TRO_Control.jpg

ChangeLog :

v1.01 - Changed 4th September so updates without the chart being visible.
The change means you can't scroll backwards through a chart looking at historical results, so have made the option to return to the old mode into a parameter.
Have also optimised the lookups to make it fast enough to cope with this new mode without locking up the cpu. Gives overall better performance.

To import:

- Download the file contained in this thread to your desktop
- From the Control Center window select the menu File > Utilities > Import NinjaScript
- Select the downloaded file

The indicator is corrupted in NJ 6.5
Anyone can modify it ?

[T2020]

TRO_SM_Control_PMSM6
http://i11.tinypic.com/644wbav.png

"How I use TRO_SM_CONTROL_PMSM6:
The Major/Minor daily is the row that dictates which way to trade.
If buyer/buyers then I look to buy.
If seller/sellers then I look to short.
If Major and Minor disagree... I WAIT. NO TRADING.
Then, I look at the 60 minute row. Same rules as daily.
If I am a buyer and the 1/5/15 rows all say seller, I know the buyers will be pushing the sellers back soon.
When I see the price stop moving at DYNAMIC SUPPORT, then I buy.
When I see the price stop at dynamic resistance and the sellers take control on the 1 or 5, I sell.
This is so simple it's not funny.
All you have to do is follow the rules.

Focus on:
1) who's in control ?
2) is price at/near dynamic s/r " -TRO
I'd be interested in learning a little more about this indicator .How Major
and minor buyer/seller calculations are done etc . tia

[NinjaTrader_Bertrand]

Hi T2020, unfortunately I'm not aware of documentation for this custom indicator, so best would be to open up the NinjaScript code and review the calculations done to arrive at those signals.

[T2020]

OK , I'll take a look . See If I figure it out . Thanks .

[T2020]

The only thing I recognize is the (price-Low)/(high-Low)*100 .
Where is price in relationship to the current bar range . Nothing
else makes any sense to me . It seems to work though . :)

[jbrooks727]

Hi, thanks for a great job converting all these indicators.

I've been playing around with them and I have a question regarding DynamicSR and DynamicFib.
When you do:

int HH = Bars.HighestBar(Period-1);
if(High[0]==High[HH] || DynamicR==0)
DynamicR=High[HH];

Is that the right way, or should we use:

DynamicR = MAX(High,Period)[0];

The end result is slightly different, and I'm not sure which one was the original expected behaviour.

Thanks,
J.

[NinjaTrader_Josh]

J,

The conversion was done to the specifications of the original author. If you want to make changes feel free to do any that works better for you.

[xpop2027]

I have the buyzone strategy scripted and ready for trading that i am willing to share but i will like experienced ninjatrader programmers to add/tweak it to run how it should. I currently have it to scale out of positions and set trailing stops. Also, it moves stop to breakeven after 5+ pt gain (i set it for futures) but that can all be changeable. when i load the strategy it doesnt trade when its suppose to and doesnt exit when its suppose to. also i am interested in setting a parameter where it would stop trading after -$500 loss for the day.. please reply to his msg if you are interested and understands ninja coding... once the strategy is done i will load it for all to use

[therumpledone]

6302

Looks like you guys like my indicators.

Have you seen my latest?

[therumpledone]

http://i27.tinypic.com/v75t83.gif

Looks like you guys like my indicators.

Have you seen my latest?

[astra]

6302

Looks like you guys like my indicators.

Have you seen my latest?


The chart looks very interesting. Any details?

[draime]

Is there a NT version for TRO's DYNAMIC_FIBS_SR_Trail and 3_Level_ZZ_Semafor_TRO_MODIFIED_VERSION ? I think is what he uses in that last image, and many people are happy with it. Just that i like futures more then forex, no offense :)

[zikonc]

Could someone help me accessing historical values of TRO_Dynamic_SR3 indicator within the strategy?

Basically, this line produces values
(Close [0] > TRO_Dynamic_SR3(5).DynLong[0])
where as this line does not
(TRO_Dynamic_SR3(5).DynLong[1] > TRO_Dynamic_SR3(5).DynLong[0])
I obviously am not a programmer to know where the issue is but have noticed to have problems with
TRO_Dynamic_SR3(5).DynLong[1]
TRO_Dynamic_SR3(5).DynLong[2]
...etc
and not withTRO_Dynamic_SR3(5).DynLong[0]
Any help is greatly appreciated.

[jdella]

http://i27.tinypic.com/v75t83.gif

Looks like you guys like my indicators.

Have you seen my latest?

can this template be written for NT or is it for MT4 only?

Thanks,

Jeff

[JohnPS]

Hi T2020, unfortunately I'm not aware of documentation for this custom indicator, so best would be to open up the NinjaScript code and review the calculations done to arrive at those signals.

Bertrand, can you direct me to any of the indicators submitted by therumpledone? There is discussion about them being here at NT but I have not found anything. Any help would be appreciated.
best Regards,
John

[astra]

Bertrand, can you direct me to any of the indicators submitted by therumpledone? There is discussion about them being here at NT but I have not found anything. Any help would be appreciated.
best Regards,
John

Post #1, etc here. Cheers.

[JohnPS]

Post #1, etc here. Cheers.

Thanks Astra!

[mea109]

TRO_SM_BattleLines
http://kreslik.com/forums/userpix/2138_TRO_SM_BattleLines_1.jpg

Hello everyone and thank you for all these indicators, but I tried this one and it did not work with graphic range, is this normal?
thank you

[NinjaTrader_Bertrand]

mea109, on which symbol and connection did you apply this? Can you post a screenshot of the behavior you see? Thanks

[mea109]

mea109, on which symbol and connection did you apply this? Can you post a screenshot of the behavior you see? Thanks
hello it's fce
http://img14.imageshack.us/i/trobertrand.jpg/
http://img14.imageshack.us/i/trobertrand.jpg/

[NinjaTrader_Josh]

mea109,

These indicators are provided as is and were made for NT6. They likely do not work with the Range chart type of NT6.5.

[mea109]

ok, thank you
Yet it works in minute graph

[NinjaTrader_Josh]

Correct. Range charts are very different from Minute charts and likely is simply not compatible with the code of these old indicators.

[mea109]

ok
merci beaucoup

[NIGHTHAWK]

I will when I have some free time. No ETA on this though.
hi, Josh.
i downloaded the zip from post 77, but when i try to load it i get a message saying that there is no script in the file. And yes i downloaded other indicators with no problems. Your help will be appreciated.THANKS
NIGHTHAWK

[NinjaTrader_Josh]

Open the zip up and take a look if there are files inside. These indicators are provided as-is as 3rd party indicators. They are very old and may or may not work.

[randyjb]

The indicator in message # 77 is not a Ninjascript based indicator.. it is an "eld" or Tradestation script based indicator.. that is why it won't work with your NinjaTrader charting. The person in that message was attempting to provide an example of a Tradestation indicator that a programmer might convert if they so desired.

hi, Josh.
i downloaded the zip from post 77, but when i try to load it i get a message saying that there is no script in the file. And yes i downloaded other indicators with no problems. Your help will be appreciated.THANKS
NIGHTHAWK

[NIGHTHAWK]

The indicator in message # 77 is not a Ninjascript based indicator.. it is an "eld" or Tradestation script based indicator.. that is why it won't work with your NinjaTrader charting. The person in that message was attempting to provide an example of a Tradestation indicator that a programmer might convert if they so desired.

Thanks, appreciate the reply

[NIGHTHAWK]

Open the zip up and take a look if there are files inside. These indicators are provided as-is as 3rd party indicators. They are very old and may or may not work.

Thanks,
There are files inside.
I think Randy reply may have answered it.

[omololu]

TRO_SM_Control_PMSM6
http://i11.tinypic.com/644wbav.png

"How I use TRO_SM_CONTROL_PMSM6:
The Major/Minor daily is the row that dictates which way to trade.
If buyer/buyers then I look to buy.
If seller/sellers then I look to short.
If Major and Minor disagree... I WAIT. NO TRADING.
Then, I look at the 60 minute row. Same rules as daily.
If I am a buyer and the 1/5/15 rows all say seller, I know the buyers will be pushing the sellers back soon.
When I see the price stop moving at DYNAMIC SUPPORT, then I buy.
When I see the price stop at dynamic resistance and the sellers take control on the 1 or 5, I sell.
This is so simple it's not funny.
All you have to do is follow the rules.

Focus on:
1) who's in control ?
2) is price at/near dynamic s/r " -TRO

Josh,

Do you still use this "TRO_SM_Control_PMSM6" or the "TRO_SM_Control_PMSM6_Pop" ? How effective is this ?

I have it on my chart and I use it as a Thermometer (sort of).

If you don't use any of these versions anymore, is there a new version available; and do you use it ?

Lolu

[NinjaTrader_Josh]

Lolu,

That is the last version I made. I unfortunately have not been actively trading for some time now so, no, I don't use them anymore.

[omololu]

Lolu,

That is the last version I made. I unfortunately have not been actively trading for some time now so, no, I don't use them anymore.

Josh,

Thanks.

I've been using the "Pop" version for sometime now on SIM mode, and its very interesting and fascinating to see market players' actions on this "Thermometer". Hey, the "Pop" version imports into NT7Beta but does not function as expected. Can you have a look at this ?

Best Regards.

Lolu

[NinjaTrader_Josh]

Lolu,

These indicators were made in 6.5 and may or may not work in 7. They were provided as 3rd party indicators created during my free time. Unfortunately I do not have time at the moment to convert them for 7. Feel free to make any changes you feel necessary to achieve the desired effect.

[kc8flq]

Can anyone convert this over to ninjascript? I'm no programmer otherwise I would do it. Or point me down the right path to start learning code.

[NinjaTrader_Bertrand]

Welcome to our forums - please check into those tutorials to get started into custom indicator coding -

http://www.ninjatrader-support.com/HelpGuideV6/Overview18.html

For a professional conversion into NinjaScript, a consultant would be a good route to take -

http://www.ninjatrader.com/webnew/partners_onlinetrading_NinjaScript.htm

[kc8flq]

Somehow I knew I wasn't going to get out of it that easy :eek: :D

Thanks for the links Bertrand. I downloaded the pdf for ninja, now to start plugging away......

[heywally]

Have been following NT for years but now, I am moving over to Ninja from Tradestation (buh-bye) and one of the reasons is the incredible support over here. Never seen anything like it .... TY!

[NinjaTrader_Bertrand]

Welcome to NinjaTrader and thanks for the kind words - appreciated!

[kumaresh11]

Bertrand, Josh

I downloaded the TRO_Dynamic_SR3_v1.10 from here
http://www.ninjatrader.com/support/forum/showpost.php?p=12778&postcount=6
The file was dated 8/8/2007

Is this the modified version? is there aversion with entry alerts?

[NinjaTrader_Josh]

kumaresh11,

Sorry we would not know what modified version you are referring to. Unfortunately these indicators have been provided as a 3rd party indicator for use but we no longer maintain them due to time constraints.

[Gregory Arkadin]

kumaresh11,

Sorry we would not know what modified version you are referring to. Unfortunately these indicators have been provided as a 3rd party indicator for use but we no longer maintain them due to time constraints.

NY Josh:

where is the latest TRO dynamic 3 (not the fib one)? I know there is not a version 7 for nt, but I was looking for the one which had the option of adding a stop loss

also, how d you use the buy zone indicator?

[NinjaTrader_Ben]

Hello,

I am sorry, you will need to search our file sharing sections of this forum.

[kumaresh11]

Ben - Do we have HighFive converted for NinjaTrader? I saw a request in this thread and not sure if it was completed

[NinjaTrader_Ben]

Hello,

I am sorry, you will need to search our file sharing sections of this forum.

[winja]

Josh, rather than on the daily open how would I code the BuyZone to paint a new BuyZone on the hourly open price. Thanks in advance. winja

[winja]

I have modified the BuyZone code as follows:

In place of the original code here:
longtop = CurrentDayOHL().CurrentOpen[0]+spread+buyzone;
longbot = CurrentDayOHL().CurrentOpen[0]+spread;
shorttop = CurrentDayOHL().CurrentOpen[0]-spread;
shortbot = CurrentDayOHL().CurrentOpen[0]-spread-buyzone;


I have changed the code as follows:
// Current bar opening price
double barOpenPrice = Open[0];

longtop = Open[0]+spread+buyzone;
longbot = Open[0]+spread;
shorttop = Open[0]-spread;
shortbot = Open[0]-spread-buyzone;

This works fine if I place it on a 60 min chart to get the hourly BuyZone. Is there another way it could be coded to give the hourly BuyZone on a 3 min chart. Thanks in advance. winja

[NinjaTrader_Bertrand]

winja, in our NinjaTrader 7 beta you could code a MultiSeries indicator out of this, so you have access to the 60 min bars from the 3 min chart, this was possible only in strategies for NinjaTrader 6.5, however the same coding wise concepts would apply now for NT7 -

http://www.ninjatrader-support.com/HelpGuideV6/MultiTimeFrameInstruments.html

[jersey]

Has anyone been able to get the TRO_SM_Control_PMSM6_Pop to work in NT7, it doesn't seem to be working properly. Any help would be greatly appreciated.

[NinjaTrader_Bertrand]

Welcome to our forums - what errors are you getting? Are those compile errors? Our code breaking changes going from 6.5 to 7 can be studied here - http://www.ninjatrader.com/support/forum/showthread.php?t=21016

[omololu]

I've really abandoned this indicator for months now, 'cos it won't work on NT7; but your request prompted me to set it up again and see what I can make of it once again; and, "phewwwwwwwww !!!", it just works (see my attached screenshot) on my NT7b21; but not until I set the "Data Series ---> Period based on" to LAST instead of BID that I have all my charts set to.

http://www.ninjatrader.com/support/forum/attachment.php?attachmentid=14743&stc=1&d=1287660224

[jersey]

omololu (http://www.ninjatrader.com/support/forum/member.php?u=6563):

Thank You for your help, the indicator seems to be working but keeps freezing my chart. Would you know off hand what the criteria is that is applied to this indicator for the major, minors etc. to change, there is very little info for this indicator out there. Thanks again

[omololu]

Yeah, very little info on this indicator; but Josh, the starter of this thread, should be kind and in the position to provide a brief update on how to use this indy.

Omololu

[NinjaTrader_Josh]

omololu,

These indicators are provided as-is as 3rd party indicator. If you want info on how to use these please go to kreslik.com and inquiry with the originator of these scripts as all that was done was just a port of TheRumpledOne's TS scripts to NT.