View Full Version : No Daily chart for ER2...
BradB
01-25-2007, 07:09 AM
If I try to open a new chart for ER2 for daily or larger, I only get the current bar.
NinjaTrader_Ryan
01-25-2007, 07:16 AM
Hello Brad:
Thank you for your post.
Which datafeed/broker are you connected to?
-Ryan
BradB
01-25-2007, 07:17 AM
Zen-Fire/ Amp...
NinjaTrader_Ryan
01-25-2007, 07:24 AM
Hello Brad:
For NT 5, Zenfire only provides historical data for tick and min. charts.
For NT 6, daily historical data is supported. Follow the link below to download NT 6.
http://www.ninjatrader.com/web/download_download.htm
-Ryan
BradB
01-25-2007, 07:25 AM
I'm running NT6. 6.0.0.5
NinjaTrader_Ryan
01-25-2007, 08:18 AM
Hi Brad:
NT 6 currently will not support daily historical data with Zenfire.
Ryan
NinjaTrader_Ryan
01-25-2007, 08:19 AM
My apologies for the previous misinformation.
-Ryan
BradB
01-25-2007, 09:07 AM
That can be a big problem. You mentioned 'currently', is that planned to be changed in the near future? Thanks.
NinjaTrader_Dierk
01-25-2007, 09:32 AM
We have it on our list. However, there is no ETA available yet.
ETemp
02-13-2007, 05:41 AM
This is one of my concerns as well. I was told that the reason that I could not see any data on a daily chart was because most likely my broker does not support it. Well, I checked using NT5 and I can get data for the last year at least using same broker.
This is something that needs to be made to happen sooner than later imo.
NinjaTrader_Dierk
02-13-2007, 06:07 AM
Neither NT5 nor NT6 supports historical dialy data through Zen.